Attempt of making 3D model with use of photogrammetry technique. This project was part of my Master's Thesis.
Using Nikon 3100 I've taken around 60 photos of eagle sculpture in two rounds, around the sculpture and little above it I also took photos of front detailed area. Photos have been edited in Adobe Camera Raw (color corrections, reduction of blacks/shadows on model. I was tying to achieve as flat as possible photos, without self-shadowing.
Next, all photos have been loaded to Agisoft Photoscan. Some cleaning has been done, most of it after building dense cloud.
Few areas results in white mesh/texture fill, which is caused by lack of photos of this surface. Also there are few blurry places caused by my newbie skill in photography :)
You can check my results on my sketchfab profile or viewer below :)
Using Nikon 3100 I've taken around 60 photos of eagle sculpture in two rounds, around the sculpture and little above it I also took photos of front detailed area. Photos have been edited in Adobe Camera Raw (color corrections, reduction of blacks/shadows on model. I was tying to achieve as flat as possible photos, without self-shadowing.
Next, all photos have been loaded to Agisoft Photoscan. Some cleaning has been done, most of it after building dense cloud.
Few areas results in white mesh/texture fill, which is caused by lack of photos of this surface. Also there are few blurry places caused by my newbie skill in photography :)
You can check my results on my sketchfab profile or viewer below :)
Original Photo
Photos aligning
Dense Cloud
3D Mesh
Generated texture
Final
Thanks for watching! : D
