Concept A
CMF
Installation
Step1: Fasten the VESA mount with tablet mount by 4 screws (if need to have rotating function,
need to loose a screw in VESA mount).
Step2: Check the switch indicator is in Green and before putting
tablet, users can pull the ARM to adjust then can fasten
their tablet.
Step 3 : Hold the tablet and put it into the arm from bottom-right corner.
Step 4 : Push the tablet into the tablet mount then fasten the tablet.
The Z-axis adjustment had a spring inside that can let tablet against the block of spring to have better tightness in Z-axis direction.
Step 5 : Repeat step 3 & 4 if need to confirm the tablet to be secured in correct distance and angle.
Step 6 : Turn the switch to lock the arm. The indicator showed green when arm unlocked and shows
red when locked.
Different SKU to show having a mechanical lock instead of switch lock and locking in CW direction and unlocking in CCW direction.
From 6" to 12"
Concept B
CMF
Installations
Step1: Fasten the VESA mount with tablet mount by 4 screws (if need to have rotating function,
need to loose a screw in VESA mount).
Step 2: Rotate the knob in CCW direction to extend the arm for suitable distance.
Step 3: Hold the tablet and rotate knob in CW direction then the clips will fasten the tablet.
Step 4: The knob will be locked in red indicator when tablet was fastened tightly.
Oppositely if showed green indicator, it means the tablet was in loose situation.
The clip design can meet different thickness of tablets easily even with protect cover.
Before installing into this mount, users can adjust the locations.
Different SKU to show having a mechanical lock instead of switch lock and locking in CW direction and unlocking in CCW direction.
From 6" to 12"
© 2015 Nortek, Inc.
