Responsibilities included: Worked with LAC for Rehabilitation of Lower Bari Doab Canal (LBDCIP/ICB-03) Mega Project. As a Construction Manager responsible for all civil works and quality control. Supervision of construction activities of Earth Work including raising and strengthening of canal banks, stone pitching/bank protection of critical reaches, construction of fall cum V.R Bridges, cattle bath construction. Construction of all hydraulic structures including Head Regulators, Construction Supervision of V.R. Bridge on LBDC Canal and Prepare billing invoices (IPC’s) .Technical correspondence with Client, Contractor and Design Section. Updating the progress reports of the project and complete coordination and implementation of all quality control procedures. Plot cross-section profile and compute areas and volume of earthwork quantity.

Worked with LBDC Consultants for Rehabilitation & upgrading of Balloki Barrage & Lower Bari Doab Canal Systems a Mega Project funded by Asian Development Bank Manila (Philippine). As a Quantity Surveyor (Estimator)/ Sr.Survey Engineer responsible for all civil works and quantity estimation. Responsible for Geometric design of Canals, Disties & Minors. Supervision of construction activities of Earth Work including raising and strengthening of disties banks, stone pitching/bank protection of critical reaches, construction of fall cum V.R Bridges, cattle bath construction. Construction of all hydraulic structures including Head Regulators & Meter Flumes Construction Supervision of V.R. Bridge and verify billing invoices (IPC’s) .Technical correspondence with Client, Contractor and Design Section. Updating the progress reports of the project and complete coordination and implementation of all quality control procedures. Plot cross-section profile and compute areas and volume of earthwork quantity. Also working as office manager and responsible for document control other all office works. Also Worked as Construction Engineer.

Responsible include: work as survey team Head to put all Survey data for Site Surveyors using AutoCAD & Related Applications. Put Out Data Using AutoCAD for 1.9 m Dia Pipe Line, Roads & Water Reservoirs .Conduct topographic survey on existing structures, utilities using Leica TPS 407 Total Station. Prepare cost estimates and construction specifications of all the proposed construction project assigned. Compute Extra Quantities Following BOQ. Supervise and responsible to check final lay out prior to excavation and construction. Responsible to coordinate with inspector/consultant. Cost estimates and construction specifications of all the proposed construction project assigned. Prepare reports and scheduling of project as directed by the section Head. Plot cross-section profile and compute areas and volume of earthwork quantity

Traverse and establish control points horizontal and vertical using Total Station. Prepare inspection request for survey validation of quay wall alignment. Conduct joint survey checking of formworks, bolts template of Reservoir to concrete casting. Set-out alignment and slope checking of filter and protection layer. Conduct survey monitoring for settlement and displacement during pre-loading. Setting out base line and responsible to check final lay out prior to installation of pre-cast blocks. Prepare cost estimates and construction specifications of all the proposed construction project assigned. Prepare reports and scheduling of project as directed by the section Head. Prepare project estimates and material requisition. Plot cross-section profile and compute areas and volume of earthwork quantity

Worked as a Sub-Engineer with university of engineering and technology Lahore on above said project / section which was covered area of 320 acres supervised which includes Construction Supervision of Excavation, Earth Work, Back filling, Row Clearing & Concrete Work, Testing of Material, concrete structure of Pumping Station, different educational blocks like Chemical Block, Mechanical Block, Electrical block, Main library, Admin Block and main access. Foundations of these blocks, R.C.C pipe Culverts, M.S Pipes in road crossing. Checking of concrete mixing, brickwork, cement plastering, floor tiling, marble flooring, public health system, sewerage system, structure work, electrical installation, white wash, distempering, and measurement of quantities.

Worked as a site engineer/surveyor supervised which Construction Supervision of Excavation, Earth Work, Back filling, Row Clearing & Concrete Work, Traverse and establish control points horizontal and vertical using Total Station. Prepare inspection request for survey validation of quay wall alignment. Conduct joint survey checking of formworks, Prepare and compute all survey data with horizontal and vertical curves; i.e. with super elevation and parabolic curves. perform and established control and references both for horizontal and vertical. Assist and supervise pre-construction survey and conduct topographic survey on existing structures and evaluate actual position compare to as per plan and designs. Run precise final checking of elevation of sub-grade, sub-base and base course materials. Supervise and responsible to stake out centerlines and limits of roadway prior to start and during earthworks operations. Supervise structural excavation and installation of drainage. Supervise sub-base, base course preparation and Asphalt paving of wearing course. Prepare schedule of work and accomplishment reports.

Worked on the project of Construction of Best way cement factory in the private sector and Housing Schemes development, Checking of concrete mixing, brickwork, cement plastering, floor tiling, marble flooring, public health system, sewerage system, structure work, electrical installation, white wash, distempering, and measurement of quantities

Trainee Engineer in Lab

Worked with SAPL (Saudi Arabian Parsons Ltd.) for Program for Studying, Designing & Supervision Projects of the Ministry of Housing in Kingdom of Saudi Arabia as Sr.Surveyor/Estimator Verify Contractor’s IPC, X-Sections for cut & Fill, Roads Vertical and Horizontal Alignment and Stock piles area Using GXR2 Sokkia GPS, Verify Contractor’s Quantity Claims (X-Sections) using Auto cad Civil 3d 2015 Prepare cost Variation & Cost Analysis beyond from BOQ. Supervise and responsible to check final lay out prior to excavation and construction. Responsible to coordinate with inspectors for site execution and Lead Survey Team. Prepare Weekly /Monthly Progress Reports of survey. Prepare reports and scheduling of project as directed by the Project Manager. Plot cross-section profile and compute areas and volume of earthwork quantity. As survey team Head to put all Survey data to Site Surveyors using AutoCAD & Related Applications. Put Out Data Using AutoCAD for Pipe Line, Roads & Water Reservoirs. Conduct topographic survey on existing structures, utilities using Sokkia GXR2 GPS.

As a Sr. Surveyor /Q. S responsibilities and duties:
 Planning, priorities, assign and review the work of staff involved in surveying.
 Supervises and participates in the work of subordinates engaged in the revision of topographic survey maps submitted by Contractors.
 Assist the supervision team for all site information’s related to surveying works and carry out all function as assigned by them and managing information flow from supervision team to field surveyors and vice versa.
 Establishes schedules and methods for completion of surveys.
 Recommends and assists in the implementation of goals and objectives.
 Implements policies and procedures.
 Evaluates operations and activities of assigned responsibilities.
 Recommends improvements and modifications.
 Prepare various reports on operations and activities.
 Develop criteria for the design and modification of survey instruments
 Locate and mark sites selected for geophysical prospecting activities such as efforts to locate petroleum or other mineral products.
 Establish fixed points for use in making maps, using geodetic and engineering instruments.
 Record the results of surveys including the shape, contour, location, elevation, and dimensions of land or land features.
 Adjust surveying instruments to maintain their accuracy.
 Verify the contractor’s invoices.
 Prepare of Monthly Progress Report for Site