Add to Collection
Tools Used
About

About

Unfortunately, this will never fully be finished. The .dwgs with the upper half of the model are lost forever. The "Blue Screen of Death" saw to … Read More
Unfortunately, this will never fully be finished. The .dwgs with the upper half of the model are lost forever. The "Blue Screen of Death" saw to that on my old laptop. And I was so damn close! Two arms, wires and small details here and there still needed. SOFTWARE: 100% AutoCAD 2010 - 2012 MODELING TIME: 2 Months+ RENDERING TIME: 6 Mins+ Read Less
Published:
Each part down to the bolts and screws is individually modelled for 100% accuracy. This was accomplished by hours of research online for photographic refernces to the film, toys and collectors models. Then hours of drawing and sketching each day and working out scales and propertions. I spend at least six hours a day each dayfor 2 month working on it.
 
The aim at the end was to be able to create an "exploded view" set of dimensioned plans and schematic for someone to actually build  a functioning model of it. I had a few engineers and some programmers in the local hackerspace who expressed some interest in taking the project on but when the drawing files were destroyed the project was doomed. And I was looking forward to having a remote control killing machine of my own design. Who wouldn't? :)