Materials:
Printer (optional).
Pencil.
Cuter.
Insulating.
TapeSilk.
Screen-printing.
Ink.
Squeegee (D-shaped or with square corners).
Frame.
Precision knife.
Pencil.
ClothWater.
Sponge.
Steps:
1. Buy a frame and make sure the frame is large enough for your design.
2. Make a sketch of your design on the cardboard and cut out the design of the contact paper and apply it on the frame.
3.Use the squeegee to set the design. Align the screen on the object you are printing. The mesh should touch the material you are going to stamp, such as a paper or a T-shirt. If you are going to wear a shirt, slide a cardboard between the layers of the shirt to prevent ink from dripping.
4. Apply a little ink on your design with a squeegee.
5. Remove the silk screen slowly. Remove the screen from the shirt or paper by applying uniform pressure.
