Holman Fenwick & Wilan @ Samsung Hub
Eubiq Power Track & Diversity Panels
Eubiq Power Track & Diversity Panels
For this project, Holman Fenwick & Wilan @ Samsung Hub, the client was very interested in having the Eubiq Power Track incorporated into their office Panel System.
And for them, they had chosen 2 very different combination of Paneling System, namely, the Diversity (in-house) and the Teknion Transit Panel System.
Incorporating the Eubiq Power Track into the Teknion Transit Paneling System was too difficult as the add-on accessories, module which I had designed earlier, could have easily catered for.
However, the Diversity Paneling System was a little different.
IT is a thin panel system and furthermore, the client want it to be mounted onto the walls.
And for them, they had chosen 2 very different combination of Paneling System, namely, the Diversity (in-house) and the Teknion Transit Panel System.
Incorporating the Eubiq Power Track into the Teknion Transit Paneling System was too difficult as the add-on accessories, module which I had designed earlier, could have easily catered for.
However, the Diversity Paneling System was a little different.
IT is a thin panel system and furthermore, the client want it to be mounted onto the walls.
Shown above in the implementation of the Eubiq Power Track into the Teknion Transit Paneling System, using the add-on module which I had designed earlier.
Shown is is the Diversity Panel, which the client request to have not only the Eubiq Power Track incorporated, but also as a single unit to be mounted on to the walls.
Getting the Eubiq Power Track into the Diversity Paneling System was not the only challenge as it only involved in coming out of a solution to re-design the cross section of the boards to accomodate it, follows by improvising the bracketry to mount the Eubiq accessory and the whole unit to the walls.
The main challenge was eventually when there are 2 or more panel hanging side by side as it is not the original design specifically for these thin panels to be able to run electrical wirings through them.
After some thoughts, a new bracketry was designed and a slight modification to the panel's frame, on did it allow up to accomplish the challenge.
The main challenge was eventually when there are 2 or more panel hanging side by side as it is not the original design specifically for these thin panels to be able to run electrical wirings through them.
After some thoughts, a new bracketry was designed and a slight modification to the panel's frame, on did it allow up to accomplish the challenge.
