Solar panels have been existing since the past two decades as the best source of renewable energy. It is one of the best installments for private homes as well as the corporate buildings. Solar panels use the heat of the sun and convert it into energy which is equivalent to other energy source and also eco-friendly.  Solar panels do not require much maintenance and are pretty much set up to work for a long time after being set up. Although there are a few issues that you might face and you need to keep inspecting the panels and connections from time to time to prevent any malfunctions.

Potential Induced Degradation can occur to the highs and lows in the voltage of the connection between the panel and the earthing. PID can reduce the efficiency and lifespan of the panels. The issues of PID can be prevented if the inverter is used with the possibility of grounding the positive and negative poles equally. The process of PID effect can also be reversed even after the damage with the use of galvanization in some inverters. Visit here to know more about roofing.

During the installation of the panels, it is necessary to check if all the installed parts are fixed properly. If you have installed a solar panel on your roof, chances are it might loosen up and break down. Another problem is with being said that the solar panels are meant to protect your roof; it can also let the damage happening below its surface go unnoticed. The solution is to have an inspection of the entire roof time to time and especially after the windy climate to check for any loose parts.

There are external sources that can cause damage to your panels. Birds like pigeons, crows, and sparrows can start building their homes under the solar panels. This might not seem like a problem at first, but it can become a big deal if the nests of these birds start creating damage to the connections and damage due to constant movements. The best way to prevent this problem is the application of mesh, wires, and spikes around the panels depending upon your requirements.

Although the solar panel manufacturers use the best quality material, the panels can suffer microcracks due to poor weather conditions like hailstorms, or falling of nearby tree branch.  These minor cracks might go unnoticed at first but can create big problems later. It is suggested to check the panels at the time to delivery to prevent any bad panel from getting installed. In the meanwhile, the companies are trying to come up with the best material they can use to prevent any damage from weather conditions.

Wiring can turn out to be faulty due to a loose connection, oxidation or corrosion. If you face any problems which cannot be seen on the surface of the panels and connections, the chances are that the wires are faulty. Hire a good electrician who can check all connections and help you out will new installation of wiring.