Everything You Need to Know about Connect a Turntable to Speakers
The phono inputs on receivers that have them boost a turntable's signal, which is too weak to drive an amplifier's line-level input on its own. In this case, the receiver has a built-in preamplifier that increases the turntable's signal to useful levels. You can, however, use a receiver without phono inputs by connecting an external phono preamplifier between the turntable and the receiver. Turn power off to your receiver, turntable and preamp.
Connect the two output audio cables coming from the turntable to the preamp's inputs.
Connect two cables to the preamp's outputs, one cable to each output. Connect the other end of these cables to the receiver's line-level inputs. The receiver inputs may be marked "Line," "Aux" or "Tape." Switch the receiver's input-select knob to this setting when you use the turntable. Read more, https://myaudiolover.com/turntable-to-speakers/
Step 1- Connect your turntable to the receiver
First, connect the turntable audio output to the receiver phono input. The receiver will boost the signal of the turntable to be strong enough to drive the amp level input. A receiver comes with an inbuilt preamp that strengthens the signal of the turntable to a useful level. If your receiver does not have a phono input, you can use a phono preamp between your turntable and the receiver.Also, remember to ground the turntable to eliminate hum.
Step 2- Connect the receiver to the passive speakers
Next, connect your receiver to the passive speakers. Simply connect an RCA cable to the audio output port on receiver. Then connect the other end to the passive speaker input.
Step 3- Test your set up
Once you’re done connecting the turntable to the receiver, and the receiver to the passive speakers, you’ll need to turn on the units. Play your favorite vinyl recording. Adjust sound settings on your receiver to your liking. In case you fail to hear any sound, check the connections or try other ports until you get the set up working.
Conclusion
Although turntables are considered to be vintage music player units, you can still bring them back to life and enjoy music recordings from the good old days. By investing in the right passive speakers, a preamp and an amp, you can surely benefit a lot from your turntable. You can even use it to play music during a party and surprise your friends. Thus, don’t let that vintage unit continue gathering dust in your store. Put it into good use and if you don’t have one, you can easily buy a new one to remind you where music has come from.
