Přihlásit se
Objevování
Datové zdroje
Pracovní pozice
Behance
Pro
Najměte si tvůrce na volné noze
Ke stažení ze služby App Store
Dostupné v obchodě Google Play
English
Čeština
Dansk
Deutsch
Español
Français
Italiano
Nederlands
Norsk
Polski
Português
Pусский
Suomi
Svenska
Türkçe
日本語
한국어
中文(简体)
中文(繁體)
Informace
Blog
PODMÍNKY POUŽITÍ
Přístup k datům
Komunita
Nápověda
Neprodávejte ani nesdílejte moje osobní údaje
Zaregistrovat
Přeskočit na hlavní obsah
Přeskočit na zápatí
Behance
Behance
Přejít na web behance.net
Prozkoumat
Datové zdroje
Pracovní pozice
Behance
Pro
Najměte si tvůrce na volné noze
search
magnifying glass
Seřadit a filtrovat vše:
Projects
Images
People
Datové zdroje
Lidé k najmutí
Zrušit
search
magnifying glass
Podívejte se na svá oznámení ve službě Behance.
Podívejte se na svá oznámení ve službě Behance.
Přihlásit se
Zaregistrovat
search
magnifying glass
Adobe, Inc.
Adobe, Inc.
Přejděte na web adobe.com
Sledovat
Zrušit sledování
Sledovat
Sledování
Zpráva
Nástroje
Omnigraffle
Pixelmator
Wood
Oils
Plastic
Nástroje
Přidat do náladové koláže
Uložit
Sdílet a vložit tento projekt
Sdílet
Ocenit
Ocenit
Sledovat
Sledování
Zrušit sledování
Sledovat
Zrušit sledování
Electric Guitar build
x x
•
Sledovat
Sledování
Zrušit sledování
Body template was bought. I wanted to exactly replicate the shape of the original
A big pile of unfinished wood and templates. This is quite daunting
Raw wood blanks of Queensland Maple - to be planed and glued
Glued and clamped for 48 hours
Glueing the cap of Tasmanian blackwood
Body blank finished - now time to start cutting the outline of the body
Roughly cut to shape
Cutting to exact shape using template as a router guide. This is laborious - takes about 2 hours - but very satisfying to see the final shape
Routing the outline is finished. Next set of internal routs are pencilled on
First step in the "German" carve added all the way round the body.
Playing with the placement of the parts to make sure all the routs are going in the right places.
Nack and wiring cavities cut out
Using the planer to add curves for comfortable playing
Internal body routs all done. Wiring, neck pocket, bridge and neck pickups
Known as the "belly cut"
Preparing to cut out the neck from a laminate of Rock Maple
Router fail. Template was damaged meaning I had to make a new template
New neck template alongside newly cut plastic pickguard
Neck with routing for the headstock and body end
Truss rod fitted
Glueing down the fret board
Pearl dots are inlayed into the neck individually. Holes need to be drilled (one is off centre, proving the hand crafted nature of the product :)
Carving the back of the neck
Planning notes
Připojte se do služby Behance
Registrovat
nebo
Přihlásit se
Mimo jiné budete mít možnost zobrazit si personalizovaná doporučení či sledovat tvorbu jiných uživatelů.
Přihlásit pomocí e-mailu
Zaregistrovat
nebo
Připojte se do služby Behance
Registrovat
nebo
Přihlásit se
Mimo jiné budete mít možnost zobrazit si personalizovaná doporučení či sledovat tvorbu jiných uživatelů.
Přihlásit pomocí e-mailu
Zaregistrovat
nebo
Electric Guitar build
8
197
0
Vydáno:
12. března 2013
x x
Sledovat
Sledování
Zrušit sledování
Vlastník
x x
Sydney, Australia
Sledovat
Sledování
Zrušit sledování
Zpráva
Electric Guitar build
A self-directed project to craft an electric guitar. Utilised skills in carving, drawing, finishing, physical design, planning, guitar playing.
8
197
0
Vydáno:
12. března 2013
Nástroje
Omnigraffle
Pixelmator
Wood
Oils
Plastic
Tvůrčí oblasti
Řemesla
guitar
luthiery
wood
woodwork
Informace o copyrightu
Uveďte původ-Neužívejte komerčně-Nezpracovávejte
Další informace
Hlášení