Everyone knows that the use of cutting discs with good materials will greatly increase the efficiency of their work. However, the choice of cutting discs is also a headache for many users. How to choose the material size of T41 4 inches cutting disc size?

The size of the T41 4 inches cutting disc size is generally a cutting piece. The cutting characteristics of this cutting piece vary with the characteristics of the adhesive. The adhesive can be divided into different categories according to "hardness" or abrasive retention or discarding ability. .

"Hard" cuts have better abrasive retention than "soft" cuts. "Soft" cuts are used to cut hard, brittle materials because they will work with lower hardness adhesives. Decompose and continuously replenish new and sharp abrasive grains. When cutting soft and tough materials, the cutting piece with higher hardness of the adhesive should be selected. In addition, the cutting wheel with higher hardness of the adhesive wears more slowly, so it is more economic.

It is important to choose the right cutting piece for a particular material. Only the right cutting piece can ensure a small amount of deformation and a smooth surface. The higher the surface quality after cutting, the faster the desired preparation results will be obtained.