-Air Jet S
Designed & Produced by Brunt in 2018
© BRUNT. All rights reserved
Air Jet S is designed for personal use. The shape of the Air Jet S was inspired by the jet engine to emphasize a strong wind. Small air purifier with a capacity of 13 m² can be used on the desk or near the bed.
The structure of the Air Jet S is simple. Both filter and fan part are separated upward. When you open the cap, you will get a handle to separate the fan. When you remove fan part, the power automatically turns off. After the filter separated, it can be wiped or replaced to new one.
Air Jet S can, of course, measure indoor air quality. It also shows outdoor air quality via Wi-Fi. You can experience the performance of the Air Jet S by comparing indoor and outdoor air quality.
The fan part of the Air Jet S is designed to be safe. If the fan is removed during operation, the fan returns for a few seconds due to inertia. However, safety bridges at the bottom prevent accidents. Safety bridges are designed to be round to minimize wind resistance.
When you remove and assemble the fan part, you can supply power without a cable connection. The magnet built-in pogo pin make it possible to assembl each parts very easily and surely.
Small but efficient. The Air Jet S consists of 11 injection parts and two PCBs. The BLDC motor operates at 2100 rpm and has very little noise. Equipped with a top quality air sensor, it can measure more precise air quality and at the same time operate the air purifier correctly.
Air Jet S has invested heavily in molds to maintain perfect shape in all directions.
With 8 slide core molds, the shadow of the hole can be seen perfectly.
It can be placed in user’s personal space like a small flower pot. Air Jet delivers clean air to user from the nearest place of user. Take Air Jet to any places with grabing leather strap.