• Add to Collection

If you have decided that it is time to change the flooring in your home or if you're just looking at some options, you are likely surprised with how many choices are available. As a matter of fact, it seems as if we live in a world full of home upgrade ideas and flooring is no exception. Some of the options you have available include carpeting, hardwood floor, and tile. One option that should not be left out of the mix is vinyl plank flooring available at DIY Vinyl Plank Flooring Gold Coast.

When it comes to vinyl flooring, you really need to forget all of the old styles and quality that used to be available. Today, vinyl flooring is not only durable and waterproof; it is absolutely beautiful when it is installed properly. As a matter of fact, the look of vinyl can sometimes rival that of even the quality hardwood and tile floor, and that is saying a lot.

Of course, when it comes to choosing any type of flooring, you really need to think about a number of different items. Most people are going to quickly look at their budget as the indicator for what they will put in their home. In reality, there are so many other choices to make that budget should not be in the top slot. You have the durability of the floor, as well as the specific look and the size of the vinyl planks. These can all play a part in the decision-making process.

As far as the colors and patterns are concerned, you should be prepared to truly take a look and see what is available. Some of those vinyl plank flooring options are going to look exactly like stone and others will look like real wood. With so many different patterns and colors to choose from, it really deserves a lot of attention on your part.

It is also important to consider the durability of the floor. In most cases, the durability can be tied directly to the layer of the floor, known as the wear layer. This is the film made of clear plastic that is put on top of the floor and the thicker the layer, the more durable the flooring. Those layers are measured in millimeters. A lesser quality vinyl floor may be 6 mm and a higher-quality floor could be up to 20 mm thick.
This is where you really need to consider your budget along with the quality of the flooring you are choosing. If you are installing it in an out-of-the-way room that does not get a lot of foot traffic, you can get away with a thinner wear layer. If it is going into a high traffic area, however, you should spend a little bit more for thicker vinyl plank flooring.

How to Install Vinyl Plank Flooring

Any type of vinyl flooring must be put on to a subfloor that is not only clean, it is free of blemishes. If a wood or concrete floor is already installed, you can install the vinyl floor directly over it but you need to ensure that there are no bumps, dips, lines or imperfections. In most cases, you would be better off to tear up the old floor and to install it over a clean, fresh sub floor. This might include putting down a 1/8 inch sheet of plywood or subfloor to start with a perfectly smooth surface. If there are any imperfections, they will show through the vinyl.

The packages of vinyl flooring should be moved into the area where they are going to be installed at least 48 hours prior to installation. Some vinyl plank flooring may require a longer time to acclimate. It is best if you check the specific instructions on the side of the box. Make sure that you have the air conditioning or heating system running normally in the area.

The baseboard should be removed and the subfloor installed. Make sure that you go over things with a fine tooth comb to ensure that there are no leftover screws, nails or imperfections in the subfloor. At this point, you can plan the flooring layout by snapping a chalk line at the center of the walls in both directions.

Get the measurement from the starting wall to the centerline chalk line. Make sure that you subtract for the expansion gap and mark the distance on the wall with a chalk line. The center line and the line at the edge will act as a guide to ensure that you are not working with a bowed wall or any other imperfections in the outline of the room. If the last row is 1/3 plank or less, adjust the starting row to compensate.

The first row should start at the wall and the tongue should be scored and removed to compensate for the expansion gap. Holding the second plank at an angle to the first plank will allow you to fit it into place and then snap it into position. Continue to add additional pieces until you get to the end, making sure that the final piece is at least 6 inches long. You can use a utility knife to score the vinyl plank and then snap it to size.

After the first row is down, you can continue to put down each additional row in succession. Make sure that the ends of the planks are scattered and a minimum of 6 inches from each other. You should also check the patterns of the boards to ensure that you are not putting down a noticeable pattern on the floor. Insert the tongue into the groove of the previous row and drop it to snap it together.

Continue the installation, staggering the joints as you go. Take your time working around door jams and at any imperfections that may exist around the edges of the room.

It may take a little bit to get accustomed to how vinyl plank flooring is installed. With just a little bit of time and effort on your part, however, you can have a professional looking floor installed in no time at all.