This is a longboard made for dancing and freestyle.
Technical details :
- 7 maple plys
- kicks reinforced with carbon fiber
- 120 cm long
- 23 cm wide
- 80 cm wheelbase
- U concave (20 mm)
- 15 mm kicks
- 2100 grams wood only
- 2180 grams with carbon fiber
- 3975 grams with Paris trucks, Orangatang Stimulus 80a wheels and Nipples bushings 80a, Bones Reds bearings
- Integrated wheel flare
- 7 maple plys
- kicks reinforced with carbon fiber
- 120 cm long
- 23 cm wide
- 80 cm wheelbase
- U concave (20 mm)
- 15 mm kicks
- 2100 grams wood only
- 2180 grams with carbon fiber
- 3975 grams with Paris trucks, Orangatang Stimulus 80a wheels and Nipples bushings 80a, Bones Reds bearings
- Integrated wheel flare
After a few months in the Netherlands
After six months and a lot of fun riding this board I decided to reshape it.
Here is what it looks like at this point.
Here is what it looks like at this point.
The reshaping process was followed by a lot of sanding as usual and I also added a coat of polyester on the kicktails to protect them.
My goal was to round all of the previous edges.
Now the board is 115cm long and its wheelbase is 76cm.
My goal was to round all of the previous edges.
Now the board is 115cm long and its wheelbase is 76cm.
I used a freestyle set up for the board.
