By hiring a trusted professional, process of air conditioning installation must be done. However, HVAC proficient homeowner can perform the task individually also. Money can be saved in the process. Still, a question over the security remains. Some problems can be noticed in the future also. There is no doubt in the fact that installation of air conditioner is a time consuming affair. Each and every step related to installation process must be performed properly.
Step 1: Position of the indoor unit
For an excellent air conditioning installation, it is necessary to look at indoor unit adequately. It is better to avoid presence of pipe on the location. Placement of the indoor unit must not be close to the door. Transfer of air must be done in an uninhabited manner with an open vent.
Step 2: Outdoor Unit
Outdoor unit must be saved from harsh sun. Unit can be made weather proof in the process. Placement of the big fan must be far from the periphery of the house. Proper space must be retained around the place. In this way, flow of air cannot be obscured at all. Installation of the outdoor unit must be seen on the flat surface at every given occasion. In case the outdoor unit is retained in the roof then it must be shielded with wood to avoid any kind of damages.
Step 3: Twisting of copper pipe
During air conditioning installation, pipe bender must be eliminated from the copper pipe. As ½ pipe is utilized with the copper pipe, it can be crushed over a period of time. Insulation must be cut properly and pipe must be retained in expose manner.
Bending of the pipe must be done slowly at every given occasion. Due to wide radius, problems may not be noticed at all. By pressing the thumb on the pipe firmly, it is better to work outward. Depth over 1mm must be avoided. Lines must be protected adequately through the waterproof tape.
Step 4: Pipe for water drainage
In the drip tray, it is possible to notice pipe for the purpose of water drainage. Hold of the rubber must be tightened at the end. The pipe must be placed in an angle for effective result. More than 4 pints of water can be extracted through the air conditioning system during summer season. Therefore, distance must be maintained.
Step 5: Pipe Connection
To acquire impressive result from the system, pipes must be connected with the both indoor and outdoor unit at the time of air conditioning installation. Oil must be dropped on the location for effective service. Brass cones must be attached with the pipe at every given occasion. Pipes must be tightened in due course. However, issues may be observed with over tight connection.
Foam insulation is necessary over the copper pipe at every given occasion. In the joints, foam must be used. Leaking of refrigerant must be avoided. It must be checked at the start. Manufacturer’s instruction must be followed with the application of air conditioning system.
In case you are not feeling confident to finish air conditioning installation process yourself then professionals can be contacted.
