In this project, we were first assigned to made a 3D representation of an adjective of our choosing. The adjective I chose was harmonious. First, we made 'harmonious' model ideas from blue foam, and then chose the final design and made it in yellow foam. Then, we had to take that adjective and incorporate it into the design of a hammer. Both models were made of yellow foam and then coated in gray car primer. The adjective project was only primed, not wet sanded. The final hammer has multiple coats of primer which were wet sanded for a smooth finish. The hammer would be held with the hand gripped around the opening. There is harmony in the symmetry and continuity of both designs.