Testing milling steels on a veneered particleboard.
Board and veneer thickness is 13 mm. Tracks are made to fit 10x10 mm steel bar and 20x3 mm flat bar, wich will allow the steel parts to have contact.
More testing. A solid piece of wood is glued to a particle board before they are both covered with veneer on both sides.
An 80x80 mm test plate with the intarsia design for the case.
Intarsiamaking in full scale.
Like the test piece there will be solid wood in the front.
Four walls are finished with the intarsia applied.
Four walls, with some tracks for bolts on the inside.
Now we wait...
Box finished. Now the detail work can start!
Milled tracks for the legs.
Legs in 10x10 mm brushed steel.
Box processed with linseed-oil.
Threading of the legs.
Thread facing the inside of the box.
20x3 mm flat bar applied and bolted to the legs.
Lathed feet in cherry wood.
With countersunk steel cylinders.
Caseing finished and amp added. Marantz 1090.
