Sint-Pietersmolenwijk Appartments: Part 1
For a school assignment I had to make the plans for the application for the urban permission. 
Because it is a school assignment this is a fictional project. It is also the first time I used archiCAD program. 
The details of the construction:
The house is a part of the Sint-Pietersmolenwijk-project in Bruges.
The masterplan determines how the residences are connected to each other and where the private and public spaces are.
Building Programme:
- for every resident there has to be a parkingspace 
- Vertical circulation: stairs and elevator
To strengthen the spaciality you have to provide at least one 'vide' (open space in the ceiling) in the building.
Building Prescriptions:
Only gable roofs are permitted, the verry maximum of flat roofs is 20% of the total roof area and must be elaborated as a green roof, a roof terrace or a field for sun panels. 
Total depth of outside walls is 45 cm, 14 cm is bearing. Bearing walls inside are 14 cm wide, not-bearing inside walls are 9 cm wide. 
Total thickness of the floor is 45 cm, with a bearing structure of 18 cm.
- Ventilation system D
- High rendement gas heater
- Heat pump

This project contains:
  - Visualizations edited in photoshop 
  - Locationplan
  - Regional plan
  - Implantation plan
  - Floor plans
  - Section cuts
  - Facade plans

Sint-Pietersmolenwijk Appartments: Part 1

Sint-Pietersmolenwijk Appartments: Part 1

School assignment number 3