Water problems are a common, yet difficult problem Greencare Pool Builder workers encounter on most construction sites. It often appears in buildings near waterlogged areas or swampy locations. Water surrounds the building and gradually seeps into the walls and surfaces. This process is called efflorescence. If care is not taken, it can drain from one affected house to another close to it. To make matters worse, some builders design homes in such a way that allows water to easily enter the buildings. Greencare Pool Builder is a leading construction firm in the building industry.

Water flows to the lowest elevation by passing through the easiest route in a building. Greencare Pool Builder explained that every house has low elevations because they are built on flat surfaces. This is actually the first step when it comes to grading out lands for building developments. This will also help to control the water flow into the drainage system via the lowest point during heavy rainfall. As a result, before the water gets to the drainage system, some of it would have been drained into the floor.

Efflorescence, as explained by Greencare Pool Builder, is when building surfaces contain moisture inside. This in return will create a crystalline salt deposit. Once the water vanishes, a building surface suffering from efflorescence will have salt deposits on the exterior. The salt deposits form a grayish hue or whitish color on the surface. Similarly, an efflorescent building may look as if there is powder on the surfaces, like a wall or floor. Unfortunately, it is quite hard to care for such a house because of the special treatment it requires.

Contrary to what a layman might think, efflorescence does not only occur inside a building, it can also happen outside it. The intensity and rate of occurrence vary as a result of the difference in temperature and water content. A house may experience efflorescence if:

The house can convert salt to a soluble solute because of the presence of moisture.

Salt crystallization happens, causing efflorescence because the moisture leaves the surfaces, via evaporation. Evaporation of moisture occurs when salt proceeds to the surface of a house.

A house shows signs of secondary efflorescence if a construction material produces salt with the aid of external moisture. Some homes in the construction stages have efflorescence, especially if workers leave construction materials outside overnight. Once outside, the materials become moist from soaking up moisture from rain or wet soil. Hence, construction workers are advised to cover construction materials and put them in pallets. This in turn will reduce efflorescence risks till they complete the construction work.

Another way a building can develop efflorescence is when construction workers incorrectly install building materials. Likewise, if a worker encounters a situation while installing a material, it can cause efflorescence. For example, insufficient airflow for the building materials, and inefficient moisture barrier while installing building materials.