INTERMODAL STATION

•

Follow Following Unfollow

INTERMODAL STATION

LOCATION IN THE MASTER PLAN

The building is located in the link point between the Master Plan and the city of Betanzos.

With the idea of "work" this area as a link between the two spaces I decided to conceive The Intermodal Station

as a continuous ramp joining the two points.

SECTION

GROUND FLOOR

CONSTRUCTIVE DETAILS

MEMORY

1.- Zinc Plates that make up the top deck.
2.- Pine Battens (4x4x200cm)
3.- Plywood board 3cm thick (244x122cm)
5.- Pine Battens (18x5250cm)
6.- Glulam beam (20x20cm)
7.- Recovering inside the building. Teak Tables (20x2x120cm)
8.- Transventilate Facade. Cavity, 3 cm thick
9.- Pine Battens (2x2x150cm)
10.- Vapor Barrier. PVC sheet of 0,3cm thick
11.- Plywood substructure. 2cm-thick boards (120x180cm)
12.- Exterior Recovering Facade. Teak Tables 2cm thick (20x2x200cm)
13.- Print waterproofing. PVC sheet of 0.3cm thick
14.- Plywood pillar of variable section (height 0.00 - 30x30cm / elevation +3.50m - 30x50cm)
15.- ø17mm metal screws
16.- Pine battens (3x3x150cm)
17.- Pilar 30x30cm laminated wood
18.- Attempt Plywood corner
19.- Carpinteria swing repellent treated lumber
20.- Double window sheet glass tube thick 6cm
21.- 30cm gravel layer thickness
22.- Print waterproofing. PVC sheet of 0,3cm thick
23.- Structural slab concrete HA-25 to 30cm thick
24.- Reinforcement of slab structure (23) with irons of 18 each 20cm
25.- Interior wooden flooring, parquet tables (20x2x120cm)
26.- Fixed Carpinteria repellent treated lumber
27.- Truss structural Plywood (20x200cm)
28.- Fastening metal part of the pillar with the foundation slab
29.- Water gutters of the roof (12x25cm)
30.- Attempt Zinc cover
31.- Layer been polished cement inclination of 2%

ESTRUCTURAL DETAILS

STRUCTURAL TRUSS DETAIL