A tile leveling system is a handy tool that helps achieve even tiles on your floors or walls. It is an excellent solution for people who want to DIY their tile projects without seeking professional help. The tile leveler has become increasingly popular in the market as it ensures an even surface, without the need for tedious manual labor. In this article, we will guide you through the steps to use a tile leveling system effectively.

1. Gather Necessary Tools 

Before you begin, make sure you have all the necessary tools. You will need a tile leveling system kit, a rubber mallet, tile spacers, and, of course, the tiles you intend to install. The tile leveling system kit typically includes wedges, clips, and a pliers.

Ensure that the surface where you intend to lay the tiles is clean, dry, and level. Remove any debris, and fill in any unevenness with leveling compound if necessary. This step is crucial to ensure the tiles lay flat, without any bumps or unevenness.

Start by placing the first tile on the surface, making sure that it is level. Use tile spacers to create an even gap between the tiles.

Take a clip from your tile leveling system kit and insert it underneath the tile, and over the tile spacer. Then, using your pliers, squeeze the clip until it grips the tile. This process will ensure that the tile stays level and does not shift during installation.

Place the second tile alongside the first one, creating a gap for the tile spacer. Once the tile spacer is in place, insert another clip underneath the tile and over the tile spacer.

Now it is time to adjust the tile leveler to make sure that the two tiles are even. Using your rubber mallet, tap the higher tile gently until it levels out with the lower one. The clip will keep the tiles in place and prevent them from shifting.

Continue to repeat the process, placing tiles and using the tile levelers until you have covered the entire surface. Remember to adjust the tile levelers as you go, making sure that each tile is level with the ones next to it.

Once the adhesive has dried, and the tiles have set, it's time to remove the tile leveler clips. You can do this by gently tapping them with a rubber mallet until they release from the tile. Be sure to remove all the clips before grouting.

Now that the clips are removed, it is time to grout the tiles. Apply grout between the tiles using a grout float, pressing it into the gaps to fill them completely. Allow the grout to dry as per the manufacturer's instructions.

Using a tile leveling system is an effective and easy way to achieve an even tiled surface. Follow the steps outlined above, and you will be able to install tiles like a professional. If you're planning to buy tile leveling clips or wedges, you can consider the products offered by "Acufloor". Using their experience of decades, the firm has been providing innovative products to install tiles effectively. To know more about them and their products, visit their official website https://acufloor.com/.