Thermal Safety Valve Manufacturer in India
Specialityvalve is the Leading Thermal Safety Valve Manufacturer in India. A thermal safety valve implies the cases when the thermal expansion of a liquid would create excessive pressure in a closed system. When liquid heat up it expands but not much as gas. Even if the temperature increases the change in the liquid is not large by a percent.
It is designed to protect the pump and operator’s circumstances when the pump is running and discharge outlets have been closed. In this situation, energy is observed by the pump which is converted into heat causing the pump water to heat up.
These factors lead to thermal valves with some unique properties. They do not need to be very large since the volume increase will be relatively small. Usually, they will have an inlet diameter that is no larger than 1. The liquid is also not safe sometimes vents directly to the environment in the case of petroleum products or acids.
Since these valves are placed in areas that have no access to a control system. It is uncommon to find valves controlled by the temperature sensor or solenoid type of system.
Thermal Safety Valve Manufacturer in India has installed the thermal safety valve in the cold-water inlet of the safety heat exchanger. This type of installation protects the valve from impurities due to limescale deposits or similar effects. Install the valve in the warm water outlet only in the case of older boiler models where the protection is provided by the integrated portable water heater without the temperature control.
Features of thermal safety valve
Guarantee for worldwide applicable
Blowdown ring may provide the best for the applications
It serves for the protection of equipment
Advantages of thermal safety valve
It has low fluid resistance
Provide superior sealing performance
Wide application range
Disadvantages of thermal safety valve
It opens or closes slowly
It prone to scratches
Body material: Cast iron, cast steel (WCB, WCC, LCC, LCB, WC6, WC9), Ductile iron, carbon steel, stainless steel (SS316, SS304, CF8).
Class: 150 - 2500, PN10-PN450
Size: ½” - 40”
Ends: Socket weld butt weld, flanged, threaded.
Operation: Handwheel, Gear operated, Electric Actuated, and Pneumatic Actuated.
