Super Pucket
I decided to make Super Pucket because I have seen it a lot on social platforms like Tik-Tok and Pinterest. I have always thought it was a cool and unique game. It was a wooden base with wooden railings.
The first step that I had to do was measure out the side pieces for two to be about a foot and a half and the three middle pieces were 11 inches long. Then I used the chop saw to cut them and I took the very middle piece and cut the slot in it for the pucks to shoot through.
Next, I glued all of those pieces together and brad nailed them too for extra strength and cut the base out of plywood using the table saw.
Next, I cut out the little pucks to be about an inch and a half using the bandsaw and then stained them, the structure, and the base.
Lastly, I stapled rubber bands to sides of the inside to make sure it was the correct height for the pucks and correct distance from the back side to be able to pull back for shooting.
