Ok, so here I collected most of the pictures from building my 4x5" large format camera. All the aluminum comes from scrap yard. Most of the parts are handmade, using just drill, saw, files and sandpaper.  Enjoy : )

So here you can see, how I made the parts - I drilled lots of holes and then file throught them.

This is the smallest part... about 3x7mm

Several attempts to make a bellows. Just from paper at this point.

First buckram test

Assembling the rear standard mechanism

Anodised springback mechanism

Anodised front and rear standard locks

Focusing rails

Anodised front standard

Complete front frame with lens

Making of my first bellows

Complete rear standard with springback

Brass focusing screw with aluminum knob

Casting of a focusing nut using the focusing screw, simple mold and epoxy resin with graphite filling.

Making of bellows V2.0 - the first one was too thick and tough

The new one vs. the old one

Finished camera with marks

At last the folding hood

This is the very first picture taken with this camera