ANTI is a system where user can shape his watch selecting from various cases and bands that are interchangeable and so, the watch can be modified during the time of use.
The bands, made of the leather traditionally used for horse seats in Argentina, features a hole for the case, that deforms and contour booth the shape of round or squared ones. Leaving this hole uniform, the bands can have different length, width, color and finish.
The bands, made of the leather traditionally used for horse seats in Argentina, features a hole for the case, that deforms and contour booth the shape of round or squared ones. Leaving this hole uniform, the bands can have different length, width, color and finish.
The wrist band closing mechanism is just a removable clip of steel with a pin, that must be preset in a hole in the leather band before use. When the other extreme of the band goes under the clip flaps, it is secured by the pin tip.
This clip can be used facing any side of the band, so they can be of different colors. This way, with just one band you can get two different watches, and you can expand your possibilities acquiring few more pieces.
This clip can be used facing any side of the band, so they can be of different colors. This way, with just one band you can get two different watches, and you can expand your possibilities acquiring few more pieces.
To open or close the case, it’s only needed to turn the back cover 90 degrees, an then you can change the band or battery. It’s extremely easy and quick, but also safe, and you no tools are needed.
Special bands can be used to make pocket or neck watches.
The crown used for time setting is hidden between the band and the case, so it doesn’t protrude and can’t bother the user like the ones in other watches does.
The time is shown with a disk system, that changes the hierarchies found in traditional analog watches. The hours is displayed by the external indicator, the minutes by the middle one, and the seconds by the internal one (if present). Disks are used because they’re easier to manufacture than watch hands.
The outer and back case are made of injected aluminum, later, anodized, while the inner case is made of injected polyurethane rubber. The windows is made of Polycarbonate, and the face behind it is injected ABS, silk screened with the indications, while the disks are CNC cut steel, then painted.
The movement, its holder and the crown stem are standard Miyota ones, while the crown and closing flaps in the back cases are made of injected brass, with CNC machining.
The movement, its holder and the crown stem are standard Miyota ones, while the crown and closing flaps in the back cases are made of injected brass, with CNC machining.
The outer cases can have faces with applied texture, like knurled,or they can be smooth and polished.
