attention to when the drum granulator produces organic fertilizer

Details of organic fertilizer production by drum granulator

1. The fertilizer granulator machine should be equipped with two mixing powder bins to be pelletized, so that the granulator does not need to stop when changing the formula.

2. Before the organic fertilizer raw material enters the drum granulator, a rate iron removal device must be placed to protect the granulator from being damaged by some other impurities in the raw material.

3. Drum granulator should be placed on cooler, crusher should be placed under cooler.

4. In order to make the organic fertilizer particles fall to the bottom of the bin from a high place, so as not to damage the bottom of the bin, a vertical spiral chute should be installed in the bin to slow down the impact force.

5. The finished product of granular organic fertilizer should be packed in the finished product warehouse, and attention should be paid to the preservation environment to avoid affecting the effect of organic fertilizer.

A certain amount of water or steam is added to the drum granulator to form a suitable solid-liquid ratio. The solid-liquid material is rolled and coated under the action of the equipment to form particles of a certain size.

The above is the granulator machine for fertilizer in the process of operation need to pay attention to some details, not only to save a small amount of power input, to achieve effective cost reduction, but also to achieve task efficiency improvement, convenient and effective, the effect is satisfactory. It has the characteristics of high strength, good appearance quality, corrosion resistance, wear resistance, low energy consumption, long service life and convenient operation and maintenance. 

We have our own factory which covers about 13,000 square meters, and we have the professional engineer and specific workers.

Compound fertilizer process can be divided into: raw material ingredients, raw material mixing, raw material granulation, granule drying, granule cooling, granule grading, finished film, final product packaging.

The organic fertilizer production process is mainly the fermentation part and the production granulation part. Even if the raw materials for organic fertilizers are better fermented, granulation is also difficult, because the characteristics of organic raw materials are rough raw materials, lighter, and lower bonding rate.

Organic Fertilizer Production Line,With livestock and poultry waste and agricultural waste as the main raw materials, fecal or fecal waste not only created economic benefits for enterprises, but also made great contributions to human environmental engineering.

The disc granulation process has the advantages of short production process, simple structure, less investment and easy operation, and is suitable for small and medium-sized enterprises.

The new blended raw materials are fed into drum granulator at a uniform rate according to the balling rate. At the same time, the saturated steam is fed into the material layer as required, so that the granulation process can be granulated at a lower moisture content, which not only raises the temperature of the material, but also causes the material to be humidified, thereby reducing the drying load.

Roller press pellets are widely used for the production of compound fertilizers. Roller Press Granulator Production Line are more than 20 kinds of materials that have been successfully applied to granulating.

The fertilizer granulator is designed and manufactured according to the requirements of the compound fertilizer plant and fertilizer distributor.